[1]齊永飛,黃艷林,陶龍書,等.基于508XT的動態滑動掃描高效采集質量控制方法研究及應用[J].石油管材與儀器,2018,4(03):53-57.[doi:10.19459/j.cnki.61-1500/te.2018.03.013]
             QI Yongfei,HUANG Yanlin,TAO Longshu,et al.Research and Application of Dynamic Slipsweep High Efficiency Acquisition Quality Control Methods Based on 508XT[J].Petroleum Tubular Goods & Instruments,2018,4(03):53-57.[doi:10.19459/j.cnki.61-1500/te.2018.03.013]
            點擊復制

            基于508XT的動態滑動掃描高效采集質量控制方法研究及應用
            分享到:

            《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

            卷:
            4
            期數:
            2018年03期
            頁碼:
            53-57
            欄目:
            儀器設備與應用
            出版日期:
            2018-06-20

            文章信息/Info

            Title:
            Research and Application of Dynamic Slipsweep High Efficiency Acquisition Quality Control Methods Based on 508XT
            文章編號:
            2096-0077(2018)03-0053-05
            作者:
            齊永飛黃艷林陶龍書宋寶國蔡敏貴聶明濤
            中國石油集團東方地球物理勘探有限責任公司 河北 涿州 072751
            Author(s):
            QI Yongfei HUANG Yanlin TAO Longshu SONG Baoguo CAI Mingui NIE Mingtao
            BGP Inc., China National Petroleum Corporation, ZhuoZhou, Hebei 072751,China
            關鍵詞:
            508XT采集系統可控震源動態滑動掃描技術SEGD3.0海量數據質量控制
            Keywords:
            508XT acquisition system vibroseis dynamic slipsweep technique SEGD3.0 megadata quality control
            分類號:
            P631.4
            DOI:
            10.19459/j.cnki.61-1500/te.2018.03.013
            文獻標志碼:
            A
            摘要:
            可控震源動態滑動掃描技術是近年來國際勘探市場新的地震采集技術,由于其采集效率高、產生數據量大等特點,必須有配套的質控技術進行支撐,才能保證現場海量地震數據的質量。以使用508XT儀器采集系統的可控震源動態滑動掃描高效采集項目為例研究了相應的質控方法,展示了超級排列檢查及質控、可控震源無樁號施工質控、SEGD3.0數據智能化質控、多線束質控、海量數據高效轉儲與質控等系列技術。新質控技術采用后,質控人力投入減半,每天質控耗時只有原來的20%,產品交付合格率達到100%。
            Abstract:
            The vibroseis dynamic slipsweep technology is a new seismic acquisition technology applied to international exploration projects in recent years. Due to its high acquisition efficiency and generating large amount of data, it must be supported by quality control technology to ensure quality of the massive seismic data in the field. Taking vibroseis dynamic slipsweep highefficiency acquisition project by employing 508XT instrument acquisition system for example, quality control methods are studied, and the serial quality control methods of superspread inspection, vibrator stakeless operating mode, SEGD3.0 data intelligent control, multiswath quality control, massive data dump and quality control technologies, etc. are showed. After applying these new quality control technologies, the manpower involved in quality control can be reduced by half, and the daily quality control time costs 20% less than before. The delivery rate of the seismic data is up to 100%.

            參考文獻/References:

            [1] 雷坤乾,聶明濤,唐丹秋,等.無樁號施工技術在石油地震勘探中的應用[J].中國石油和化工標準與質量,2016,36(2):50-52.
            [2] 石雙虎. 高效地震勘探數據采集智能化質控技術[J]. 石油地球物理勘探,2013,48(S1):7-11.
            [3] 聶明濤,李永海,劉宏,等.GPS技術在石油地震勘探中的應用[J].石油管材與儀器,2017,3(1):76-79.
            [4] 聶明濤,張慕剛,丁冠東,等.GSR無線節點采集技術在地震勘探中的應用[J].石油管材與儀器,2016,2(4):68-71.
            [5] 李文靜,聶明濤,曹建明,等.428XL儀器微地震采集技術探討[J].石油管材與儀器,2017,3(4):82-84,89.

            相似文獻/References:

            [1]羅蘭兵,張潔,程虎軍,等.可控震源高效采集在地震儀器中的 實現方法分析[J].石油管材與儀器,2015,(01):87.
             LUO Lanbing,ZHANG Jie,CHENG Hujun,et al.Realization of HPVS in Seismic Data Acquisition System[J].Petroleum Tubular Goods & Instruments,2015,(03):87.
            [2]李富貴,萬連順,楊玉蘭,等.中繼臺在炸藥震源和可控震源 混合施工中的應用[J].石油管材與儀器,2015,(01):98.
             LI Fugui,WAN Lianshun,YANG Yulan,et al.Application of Repeaters in the Hybrid Seismic Source construction with explosive source and vibroseis[J].Petroleum Tubular Goods & Instruments,2015,(03):98.
            [3]王 雷,趙 忠,王春田.可控震源檢測數據采集系統研制[J].石油管材與儀器,2016,(02):60.
             WANG Lei,ZHAO Zhong,WANG Chuntian.Development of the Data Acquisition System for Detecting Vibrators[J].Petroleum Tubular Goods & Instruments,2016,(03):60.
            [4]張 潔,周土發,程虎軍,等.可控震源高效采集技術的效率分析[J].石油管材與儀器,2016,(01):71.
             ZHANG Jie,ZHOU Tufa,CHENG Hujun,et al.Efficiency Analysis of High-productivity Vibroseis[J].Petroleum Tubular Goods & Instruments,2016,(03):71.
            [5]法煒,王峰,劉林,等.可控震源變頻譜掃描激發的實現[J].石油管材與儀器,2017,3(06):23.[doi:10.19459/j.cnki.61-1500/te.2017.06.006]
             FA Wei,WANG Feng,LIU Lin,et al.The Realization of Varying Spectrum Sweep of Vibroseis[J].Petroleum Tubular Goods & Instruments,2017,3(03):23.[doi:10.19459/j.cnki.61-1500/te.2017.06.006]

            備注/Memo

            備注/Memo:
            第一作者簡介:齊永飛,男,1985年生,工程師,2007年畢業于中國石油大學(北京)地質工程專業,現主要從事石油地震勘探高效采集工作。E-mail:[email protected]
            更新日期/Last Update: 2018-06-25
            宁夏11选5