[1]秦洪巖.提高火驅注氣井符合率的方法與實踐[J].石油管材與儀器,2018,4(03):82-85.[doi:10.19459/j.cnki.61-1500/te.2018.03.021]
             QIN Hongyan.Method and Practice of Improving Coincidence Rate in Fire Flooding Gas Injection Wells[J].Petroleum Tubular Goods & Instruments,2018,4(03):82-85.[doi:10.19459/j.cnki.61-1500/te.2018.03.021]
            點擊復制

            提高火驅注氣井符合率的方法與實踐
            分享到:

            《石油管材與儀器》[ISSN:2096-0077/CN:61-1500/TE]

            卷:
            4
            期數:
            2018年03期
            頁碼:
            82-85
            欄目:
            經驗交流
            出版日期:
            2018-06-20

            文章信息/Info

            Title:
            Method and Practice of Improving Coincidence Rate in Fire Flooding Gas Injection Wells
            文章編號:
            2096-0077(2018)03-0082-04
            作者:
            秦洪巖
            中國石油遼河油田公司 遼寧 盤錦 124010
            Author(s):
            QIN Hongyan
            PetroChina Liaohe Oilfield Company, Panjin, Liaoning 124010, China
            關鍵詞:
            火驅符合率影響因素措施
            Keywords:
            fire flooding coincidence rate influence factor measure
            分類號:
            TE357
            DOI:
            10.19459/j.cnki.61-1500/te.2018.03.021
            文獻標志碼:
            A
            摘要:
            針對火驅注氣井符合率低,影響火驅開發效果的問題,從注氣井的日常管理入手,對影響注氣井合格率的因素進行詳細的分析。對現有的工藝流程進行了優化,對設備配件進行了改進,同時建立相應的管理制度。措施實施后提高了機組效率,實現了穩定的壓力、流量、空氣注入,提高了注氣合格率。
            Abstract:
            With view to the problem of low coincidence rate affecting the oilfield development in the fire flooding well, the factors influenced the qualified rate of the steam injection well were analyzed in detail from the viewpoint of the well daily management. The existing technological process was optimized, the equipment parts were improved, and the corresponding management system was also established at the same time. After the implementation of the measures, the unit efficiency was improved, the stable pressure, flow, air injection were achieved, and the steam injection qualified rate was improved.

            參考文獻/References:

            [1] 張方禮.火燒油層技術綜述[J].特種油氣藏,2011,18(6):1-5.
            [2] 許國民.杜66 塊火驅開發動態調控技術研究[J].特種油氣藏.2014,21(1):81-83.
            [3] GREAVES M,王玉華,裴東旗,等.THAI──稠油開采和就地升溫的注空氣新技術[J].國外油田工程. 2001,17(9):14-19.
            [4] 管曉鳳.淺談高3618塊火驅試驗井組現場管理方法[J].中國石油和化工標準與質量,2012,32(1):200.
            [5] 陳銳,邢曉凱.火驅地面尾氣處理工藝進展[J].油氣田環境保護,2013,23(6):71-75.
            [6] 李建勛,張博,郭偉.火燒油層實驗中空氣流動率和壓力的影響[J],遼寧化工,2014,43(1):92-93.
            [7] 王麗麗.螺桿壓縮機振動故障的分析與診斷[D].遼寧工程技術大學,2007.
            [8] 曾建軍.螺桿壓縮機排氣溫度過高原因分析及處理[J].壓縮機技術,2012,50(4):53-55.
            [9] 趙海洋.往復壓縮機氣缸內壓力信號檢測與分析技術[D].大慶石油學院.2006.
            [10] 邢衛東,馮金松.提高干燥器脫水效率的措施探討[J].河南化工,2004,30(4):25-26.
            [11] HEERE J,馬穎潔,吳燕龍.工業氣體流量計標定設備[J].國外油田工程,1998,14(5):30-34.
            [12] 林日億,任旭虎,謝志勤,等.火燒開發現場動態跟蹤分析[J].中國石油大學學報(自然科學版),2012,36(1):141-144.
            [13] 楊永洪,姚團軍,李濤,等.燃燒條件對火驅效果的影響[J].石油化工應用,2015,34(3):36-40.

            相似文獻/References:

            [1]張守軍,羅恩勇,楊尚諭,等.遼河油田火驅井套損綜合分析及預防對策研究[J].石油管材與儀器,2016,(04):39.
             ZHANG Shoujun,LUO Enyong,YANG Shangyu,et al.Failure Analysis on Casing Damage of Combustion Drive Oil Well and Preventive Measures at Liaohe Oilfield[J].Petroleum Tubular Goods & Instruments,2016,(03):39.

            備注/Memo

            備注/Memo:
            第一作者簡介:秦洪巖,男,1983年生,工程師,2007年畢業于東北石油大學石油工程專業,現從事火驅采油工藝的研究與管理工作。E-mail:[email protected]
            更新日期/Last Update: 2018-06-25
            宁夏11选5